The WD 133 is the ideal suction solution for collecting dust, solids, liquids, and light sludge easily and safely. Industrial suction is generated by three bypass motors that, working together in parallel, allow the operator to collect liquids quickly and efficiently. The vacuumed material enters through a metal inlet with an internal die-cast deflector in aluminum alloy and cast iron. The deflector directs the material to the bottom of the container and stops it from going towards the filter, thus protecting it and increasing its service life over time.
The WD 133 vacuum cleaner is equipped with a 130 L container capacity in painted steel and can be supplied in AISI 304 stainless steel on demand. Discharge takes place by gravity thanks to a manual ball valve situated at the bottom of the container. An external level indicator shows the amount of liquid vacuumed and an internal level indicator stops the vacuum upon reaching maximum capacity. The WD 133 industrial vacuum is supplied with two independent filter kits: one for dust and one for liquids so that the vacuum cleaner can be used for different purposes with complete safety. The Wet & Dry suction kit is included with the vacuum cleaner.
Power: 3.3 HP
Surface: 1,200 cm2
Capacity: 130 L
ENGINE / MOTOR:
| Suction type | 3 Bypass |
| Voltage | Frequency | 110V | 60Hz |
| Maximum vacuum | 98 inH2O |
| Maximum air flow | 336 CFM |
| Noise level – (EN ISO 3744) | 72 dB(A) |
| Power | 3.3 HP |
FILTERS:
| Wet Filter Type | Bagged |
| Wet Filter Media | Nylon |
| Solid Filter Type | Bagged |
| Solid Filter Media | Polyester |
MACHINE:
| Inlet | 70 Ø mm |
| Dimensions | 580 x 530 mm |
| Height | 1160 mm |
| Weight | 40 Kg |
The WD 133 is the ideal suction solution for collecting dust, solids, liquids, and light sludge easily and safely. Industrial suction is generated by three bypass motors that, working together in parallel, allow the operator to collect liquids quickly and efficiently. The vacuumed material enters through a metal inlet with an internal die-cast deflector in aluminum alloy and cast iron. The deflector directs the material to the bottom of the container and stops it from going towards the filter, thus protecting it and increasing its service life over time.
The WD 133 vacuum cleaner is equipped with a 130 L container capacity in painted steel and can be supplied in AISI 304 stainless steel on demand. Discharge takes place by gravity thanks to a manual ball valve situated at the bottom of the container. An external level indicator shows the amount of liquid vacuumed and an internal level indicator stops the vacuum upon reaching maximum capacity. The WD 133 industrial vacuum is supplied with two independent filter kits: one for dust and one for liquids so that the vacuum cleaner can be used for different purposes with complete safety. The Wet & Dry suction kit is included with the vacuum cleaner.
Power: 3.3 HP
Surface: 1,200 cm2
Capacity: 130 L
ENGINE / MOTOR:
| Suction type | 3 Bypass |
| Voltage | Frequency | 110V | 60Hz |
| Maximum vacuum | 98 inH2O |
| Maximum air flow | 336 CFM |
| Noise level – (EN ISO 3744) | 72 dB(A) |
| Power | 3.3 HP |
FILTERS:
| Wet Filter Type | Bagged |
| Wet Filter Media | Nylon |
| Solid Filter Type | Bagged |
| Solid Filter Media | Polyester |
MACHINE:
| Inlet | 70 Ø mm |
| Dimensions | 580 x 530 mm |
| Height | 1160 mm |
| Weight | 40 Kg |